Sinus Units

Product range

Sinus multi-zone manifold

A finger on the pulse – intelligent technology for superior energy efficiency.

What makes the manifold-separator combination special is its division into three temperature zones, combined with an integrated hydraulic separator to avoid mutual interference. The connection between the high- and low-temperature circuits in normal operation provides the desired minimum return-flow temperature for driving the condensing boiler in the condensation range. The result: high efficiency due to optimal utilisation of the heat in the hot water.

Nozzle spacing: 125 mm

Connection to heating circuits: Union nut

Heating circuits: 2

Heating water flow rate 2.15 m³/h

Sinus MTW

Separator for multiple temperature zones.

The Sinus separator for multiple temperature zones, or MTW, solves the problem of current system hydraulics specifically for large systems up to 400.0 m³/h.

Developed for use in multivalent heating systems, it encompasses a range of beneficial characteristics. It is a hydraulic separator, manifold and tank in one.

Size of hydraulic separator: DN150–DN700

Largest nozzle: DN65–DN400

Flow rate up to: 400 m³/h

Sinus MultiFlow Center

The distribution and collection centre is another product from the range of solutions for multivalent heating systems and cooling systems. This product also combines the functions of a hydraulic separator and a manifold. In addition to the features offered by the other variants, the distribution and collection centre also offers the possi- bility of increasing the system volume in order to utilise residual energy or reduce cycle frequency, for example.

Type (capacity): on request

Diameter: on request

Sinus cascade unit

Manifold/collector tube for receiving the boiler connections from two profile tubes one above the other, material S235 with welded-in end covers and drainage bushings ½”.

Chamber size: 120/80–200/120

Heating water flow rate: 8,6–34,4 m³/h

Power: 150–600 kW

Nozzle spacing: variable

Sinus HydroFixx cascade

Combined flow and return manifold with chambers arranged adjacent to one another and separated by sinusoidal parting wall, with directly integrated horizontal hydraulic separator welded on directly beneath the heating boilers for use on the primary side.

Chamber size: 120/120–160/160

Heating water flow rate: 8,6–14,3 m³/h

Power: 150–250 kW

Nozzle spacing: variabel

Sinus EasyFlow cascade

The Sinus ProfiFixx EasyFlow cascade forms a compact unit combining the entire primary and secondary distribution in one component. It consists of a combined flow and return manifold with chambers arranged adjacent to one another and separated by sinusoidal parting wall, with directly integrated horizontal hydraulic separator welded on for connecting primary-side heating boilers and secondary-side heating boilers in one unit.

Heating water flow rate: 8,6–34,4 m³/h

Power: 150–600 kW

SolidFlow Cascade

Primary and secondary distribution with integrated heat exchanger.

Heating water throughput rate: 8,6–34,4 m³/h

Power: 150–600 kW